Q:可以用水清洗烙鐵頭嗎?
A:
 New ST-40 Tip cleaner
No water is required to use the tip cleaner, although it cleans the tip better than conventional sponges and reduces the temperature-loss that occurs when using a wetted sponge.
The cleaner itself is made from low-abrasive brass shavings. No water is required to use the tip cleaner, although it cleans the tip better than conventional sponges and reduces the temperature-loss that occurs when using a wetted sponge. The container is made of heat-resistant and slip-proof silicon rubber that is safe for both the soldering iron and the user.
Q:最近我要買銲槍，瓦數要30瓦，烙鐵不要太粗..哪個牌子比較好?
另外，請推薦錫與鉛多少比例的銲錫比較好用?
A:
 建議買GOOT品牌烙鐵
PC板，熔點最低 --錫:鉛 = 63:37
熔點低,又怕焊點雜散--錫:鉛:銀=60:37:3
一般接點--錫:鉛 = 60:40
音響:
(i)pc板--錫:鉛:銀=60:37:3
(ii)非PC板,例如喇叭等--買錫:銀=96:4左右
Q:有最新型的抗靜電無鉛焊錫對應電烙鐵嗎?
A:
 RX-802AS lead-free Soldering Station
Extra long life, fast recovery time, lead-free soldering iron with built-in high output heater (72W) RX-802AS
The goot RX-802AS is a compact and lightweight lead-free soldering station with excellent heat recovery. It combines sophistication and high efficiency in a compact design, promising excellence in soldering work for the lead-free generation.
Q:有最新型的可對應無鉛焊錫的錫爐嗎?
A:
 POT-50C, 51C, 75C and 76C
PID temperature control minimizes deviation of solder or setting temperature.
POT-50C, 51C, 75C and 76C are lead-free applicable solder baths. POT-50C and 75C have solder baths that can withstand erosion.
POT-51C and 76C have ceramic solder baths that will not erode when using lead-free solder.
The long-life, high-insulation ceramic heater minimises electrical current leakage during work, making it safe even for delicate components.
POT-50C and 51C are high-temperature-type solder baths for transformer lead insulation removal and preparatory soldering.
All pots in this series can be connected to a computer using a smart loader for easy monitoring and control of the solder bath temperature and the control panel settings .
|
太洋電機株式會社